Features:

General Backlit LCD touchscreen
MY SET screen controls
Multi-language designation
Upgradeable via software
Built-in memory
Upper thread, bobbin thread, and presser foot sensors
Automatic thread tension control
Automatic drop feed mechanism
Easy access accessory compartment in top lid
One-piece sewing light
Built-in needle threader

Sewing
98 Decorative and Utility stitches, plus 7 buttonholes
Regular sewing speed: 820 spm with variable speed control
Twin needle guard
Start/stop sewing button
Instant switch-over to/from embroidery to/from regular sewing

Embroidery
90 built-in embroidery designs
3 fonts, plus two and three letter monogramming
PC link via ATA PC card
Maximum embroidery size: 5.5″ x 7.9″ (140mm x 200mm)
Embroidery speed 400-650spm
Three built-in alphabets
Two and three letter monogramming
Change colors to favorite thread (Janome, Robison-Anton, Madeira, Mettler)
Embroidery area tracing
Easy drag & drop for editing placement
Resize to 90%, 100%, 110%, 120%
Rotate in 45 degree increments
Flip vertically or horizontally
Time indicator
Stitch counter
Zoom in and out
Standard hoops: Large 5.5″ x 7.9″ (140mm x 200mm)
Standard 5″ x 4.3″ (126mm x 110mm)

Specifications:

One Step Instant Switch To/From Embroidery Mode
LCD Screen Grayscale 4.7″ with Backlight 94.5x74mm)
Off-line ATA PC Card
Multi-Folders (Embroidery) Built-in Memory: 1 Folder; ATA PC Card: 1 Folder
Multi-Folders (Conventional) Built-in Memory: 1 Folder; ATA PC Card: 1 Folder
Eco Mode: 1-30 min. + Off
.JEF Embroidery Format
Outer Memory Device: ATA PC Card; PC Design Card; Memory Card-via Card Reader 10000
5.5″ x 7.9″ (140 x 200 mm) Maximum Embroidery Field
400-650 SPM Embroidery Sewing Speed
3 Monogramming Fonts
Built-In Designs: Large: 10; Standard: 60; Combo: 20
2&3 Letter Monogramming Emblems
Favorite Thread Selection
Embroidery Area Tracing
Standard Hoops:Large: 5.5″x 7.9″ (140×200 mm); Standard: 5.0″x4.3″ (126 x 110 mm)
11 Number of Programmed Languages
Built-in Memory (Embroidery)
Drag and Drop for Design Position Adjustment
90/100/110/120% Re-sizing (Design)
Design Combination
Zoom Function
Flip (Vertical/Horizontal)
45 degrees
Embroider Time Indicator
Embroidery Stitch Counter Every 10 Stitches
Maximum Sewing Speed: 820 spm
Stitch Package: 98 Stitches
1 Lettering Stitches
7 Buttonholes
Built-in Memory (Ordinary Sewing)
Twin Needle Guard
Semi-Automatic Thread Tension Control
Upper Thread Sensor
Bobbin Thread Sensor
Presser Foot Sensor
“P” foot Sensor
Top and Bottom Storage Compartment
Automatic Drop Feed Mechanism
Wedge Base-1 Piece Sewing Lights
Hard Cover Case

When it comes to upright vacuums, the intelligent choice is automatic.

Automatic X4 Upright Features:

12″ working width
1300-watt motor
Glossy finish
Available Colors: Blue/Yellow (shown)
Airflow: 103.8 cfm
Cord Length: 40 ft.
Weight: 16.7 lbs.

Changing the filter bag is easy!	Brush removal is easy!
Automatic Height Adjustment: From Hard Floor to Carpet The electronic controls identify the floor and the height of the carpet nap. The brush will be raised or lowered automatically. This guarantees optimal cleaning performance on all types of carpet and flooring and protects the floor from damage. And on hard floors, the SEBO automatic X, with its intelligent design, cleans incredibly well. The sealing strip on the bottom of the machine stops the kickback of dirt and channels the airflow through the remaining three sides, increasing the cleaning performance. The High Efficiency Filter System The SEBO automatic X delivers S-Class filtration as a standard feature and is well suited for sufferers of allergies or asthma. Three Steps of Filtration: First, the three-layer filter bag collects the vast majority of the debris. Then, the remainder of the particles are collected by the micro-hygiene filter. Only the smallest, most harmless of particles remain. And to ensure you the cleanest air possible, there is also an exhaust filter.	Perfect Function: Brush Action, Suction and Filtration The brush removes the dirt and hair and moves it to the suction chamber. The strong airflow carries the debris to the three-layer filter bag.
Unmatched Reliability German-engineered and constructed to the highest standards. Power through Efficiency Active Height Control, a Timing Belt-driven Brush Roller, and an Intelligent Filter Configuration allow the automatic X series to clean effectively while using less energy. Belts Designed to Last the Life of the Machine Forget about the Belts! Slimline Design With a clearance of only 5 ½ inches, here is finally an upright that will go under your bed! 3-year Parts Warranty Allows you the Peace of Mind that comes with knowing you have chosen a machine that we will stand behind.

Features:

High speed sewing: 800-1,600 spm
Simultaneous bobbin winding
Knee lift
Pressure indicator window
Auto thread cutter
Variable speed control
DB needle
Side-loading, industrial rotary hook
Memorized needle up/down
Extra large 8.85″ x 5.5″ work area
Dual hights
Industrial-type thread take-up lever
No oil holes in bed
Sealed bearings on shafts
Up to 11 lbs. of presser foot pressure
Industrial pretension threading
Thread diagram printed on machine front
Bobbin winding diagram printed on machine top
Liquid response foot control – no stalls
Synchronized thread tension lever
Variable stitch length up to 6mm
Metal attachment setting plate
Sleek design of home machine
Quiet operation with no external motor
Dust cover
Optional extension table available

Specifications:

Knee Lifter
Sewing Speed: 800-1600 spm
Variable Speed Control
Dual Krypton Lamps
Sewing Area (from Right of Needle): 8.85 in x 5.5 in (225 x 140 mm)
Machine Weight: 25.35 lb
Hook System (Vertical Full Rotary Industrial)
Maximum Stitch Length: 6mm
Ever True Stitch Length
Independent Bobbin Winding Motor
Pressure Foot Control: 0.4 lb-1 lb
Visible Pressure Foot Gauge
Presser Foot Lift (Lever): 12 mm
Presser Foot Lift (Knee Lift): 8 mm
Industrial Thread Take Up Lever
Threading Diagram on The Machine
Memorized Needle Up/Down Key
Dust Cover
DB Needle
Highly Responsive Foot Control
Synchronized Thread Tension Lever
Industrial Pretension Threading
Attachment Setting Plate
Internal Oiling
Industrial Strength Engineering

Features:

• 12 stitches plus 1 four-step buttonhole
• Built-in needle threader
• Drop feed lever
• Extension table and removable storage compartment for free arm sewing
• Fail-safe needle insertion
• Reverse stitch lever
• One hand thread cutter
• Carrying handle
• Magnetic type horizontal full rotary hook
• Quick foot conversion
• Easy stitch selector dial
• Concealed tension dial

Specifications:

• Vertical Oscillanting Hook
• Free Arm
• Skeleton Body Construction
• 13 Stitches Including Buttonhole
• 4-Step Buttonhole
• Maximum Zigzag Width: 5 mm
• Maximum Stitch Length: 4 mm
• Lay-in Thread Tension Control
• Extra-high presser foot lift
• Marking on Needle Plate (Inches and Metric)
• Automatic Declutch Bobbin Winder
• Snap-on Presser Foot
• Needle Threader
• Thread Cutter
• Slit Thread Take Up Lever
• Horizontal Spool Pin
• Lamp
• Power Switch
• Foot Controller

Features:

• 10 Utility stitches, plus built-in buttonhole stitch
• Flatbed design to fit existing cabinetry
• Top loading bobbin system
• Handy threading guide
• Sews with no electrical power

A treadle operated sewing table (not included) is required to run machine.

Specifications:

• Horizontal Full Rotary Hook
• Flat Bed
• Skeleton Body Construction
• Retractable Carrying Handle
• Machine Size: W 370 x H 290 x D 180 mm
• Machine Weight: 12.5 lb
• 12 Stitches
• 4 Step Buttonhole
• Stretch Stitch Adjustment
• Maximum Zigzag Width: 5 mm
• Maximum Stitch Length: 4 mm
• Manual Thread Tension Control
• Extra High Presser Foot Lifter
• Drop Feed Dog (On Dial)
• Push Pull Bobbin Winder
• Snap-on Presser Foot
• Thread Cutter
• Thread Take Up Lever (Slit)
• Vertical Spool Pin
• Treadle Foot Control
• Protection Cover (Soft)

Features:

• 2, 3, or 4 thread overlock
• Lay-in thread tension dial
• Seam width: 1 – 5mm seam length3.3mm (narrow), 7.5mm (wide) 2.0mm Rolled hem
• Slim foot
• Handy needle threader
• Convenient thread cutter
• Easy rolled hem change-over
• 0.5 – 2.2 differential feed ratio
• Easy upper knife release
• Adjustable cutting width: 3.1 – 5.1mm
• Easy lower looper threading
• Differential feed
• Lower looper pre-tension setting slider
• Changeable thread guide
• Front and back needle guard
• Retractable upper knife
• Numbered tension dials
• Color-coded thread guides
• Snap-on presser feet

Specifications:

• Serger Flat Bed
• Skeleton Body Construction
• Lay-in Tension Dial
• 2, 3, and 4 Thread Convertible
• Maximum Speed: 1,300 spm
• Incorporated Tension Release Device
• Incorporated EZ Change Rolled Hem
• Adjustable Foot Pressure (Adjusting Screw)
• Snap-on Presser Foot
• Feed Adjustment: Dial on Belt Cover (with Window)
• Differential Feed Adjustment: Dial on Belt Cover (with Window)
• Dial Cutting Width Adjustment
• Alined Spool Pin Spool Stand
• Carrying Handle: Part of Machine Body
• Thread Cutter
• Length of Feet: 1 to 5 mm
• Differential Feed Ratio: 0.5 to 2.25
• Cutting Width: 3.1 – 7.3mm
• Waste chip Box
• Accessory Box
• Foot Controller

Features:

• Chain stitch
• 5 mm double needle cover stitch
• Extra large bed space: 4″ x 5.5″
• Vertical needle drop
• Greater variable stitch length and differential feed
• Exclusive free arm configuration
• One-hand thread cutter
• Superior needle system

Specifications:

• Cover Stitch Machine
• Number of Needles: 1/2
• Stitch Types: Chain Stitch and Cover Stitch
• Maximum Sewing Speed: 1000 spm
• Looper Type: Double Chain
• Seam Width: 2 Needles: 5 mm
• Stitch Length: 1-4 mm
• Differential Feed Ratio: 0.5-2.25
• Lay-in Tension Dials
• Tension Release
• Dial Stitch Length Adjustment
• Dial Differential Feed Adjustment
• Easy Chain Looper Threading
• Thread Cutter
• Arm Space (from Right of Needle Bar): 5.62 in x 3.93 in (143 mm x 100 mm)
• Carrying Handle (Fold Down)
• Vertical Angle of Needle
• Dust Cover

Click Here to Download the Janome CoverPro 900CP Brochure

Special Features:

• Light and compact, making it easy to operate and store.
• Powerful performance
• Quiet operation
• Durability – SEBO canisters are made to last
• FULL-SIZE, on-board tools
• Rubber coated wheels prevent damage to floors and rotate 360° for easy maneuverability
• Quick-release for ease of brush head change
• Large control switches for power & cord retractor
• High-quality telescopic tubes that provide convenient handle-height adjustment
• 26-foot operating range

High-power model:
The SEBO air belt K3 includes an electrified telescopic tube designed to accommodate the optional ET-H or the ET-C power head, for thorough brushing and optimal cleaning of your carpet. It also offers suction control at the handle and the Parquet Brush for hard floors.

	Easily Accessible Full-Size Attachments On-board attachments for the K-series include the dusting brush, the crevice tool and the upholstery nozzle. Parquet Brush Standard accessory tool for the K3
The 3-Step Filtration System: First, the three-layer filter bag (a) collects the vast majority of the debris. Then, any remaining particles are collected by the hospital-grade microfilter (b). Finally, the micro-exhaust filter (c) cleans the exhaust air that the vacuum emits. The air belt (d) disperses the filtered exhaust air around the canister which provides a quiet, gentle air flow. The S-class filtration system, as described above, results in 99.9% effectiveness to 0.3 microns*, making the SEBO air belt K vacuums the perfect choice for customers with allergies and asthma.
	Ergonomic Handle The SEBO air belt K handles are ergonomically designed and positioned to reduce wrist and arm fatigue. The K3 handle is even more elaborate with an additional swivel built into the handle.

Filtration:
S-Class (HEPA) net filtration with an Efficient 3-Layer, 3.7 qt. Paper Bag, motor protection filter and 250 square inch Electrostatic exhaust filter in a Sealed System.

Motor & Fan System:
10.4 Amp. (1300 Watts), 1-Fan Suction Motor in a Clean-Air System Design. Creates a complete 11.8 Amp. (1475 watts) 2-Motor System when used with the Motorized Carpet Nozzle.

Brush Roll:
Two Rows of Bristles in a 360 degree convergent format on a roll with Ball Bearings at the belt end and a Sleeve Bearing at the other. Edge Brushing on One side.

Belt:
Non-Slip Cog Type Belt

Attachments:
On-Board Hose plus a clip to hold either the Upholstery Nozzle or Crevice Tool. Also included now is the deluxe Parquet Floor Brush.

Weight:
15.4 lbs. with Carpet Nozzle
9.9 lbs. without Carpet Nozzle.

Case:
ABS Plastics

Cord:
32′ Long 18/2

Suction:
90" of Water Lift

Air Flow:
102 CFM

Additional Features:

• Finger Tip On/Off Switch with Speed Control Slide
• Adjustable Handle Length
• 12" Cleaning Nozzle Width
• Height Adjustment Indicator
• Electronic Motor Protection
• Low Profile – Needs Less than 6"
• Quiet 68 dB Operation
• Attached, Ready-to-Use Hose
• Easy Bag Changing
• Outstanding German Quality

Features:

• Cleans carpet without water
• Easy and effective in use
• Powder eradicates dust mites
• Simple brush in, vacuum out action
• Professional Dry Cleaning System
• Suitable for most carpet types
• Can also be used to agitate pre-spray
• Duo-P Powder available separately

The Perfect Team: The SEBO duo Brush machine and the carpet cleaning powder duo-P.

The dry cleaning system of SEBO is excellent for both spot cleaning and cleaning larger areas. And you can walk on the carpet during the process.

SEBO brings hygienic freshness to your carpet.

Sebo Duo Dry Cleaning Powder Refills

What you should know:

In a long-term study performed by the German Association for Allergy Research (GAF), it was shown that 6 months after a single treatment of duo-P, 7 out of 10 carpets proved to be free of dust mite allergens.

So easy to apply…

To remove even the most stubborn stains, all you need to do is…

• spread a small amount of duo-P powder onto the soiled area,
• gently work the powder into the carpet using the brush provided within the SEBO Clean Box,
• leave it to do its work.

If you want to clean larger carpet areas, you can save time and effort by using the SEBO duo brushing machine, which opens the carpet pile enabling the duo-P to clean around each separate fiber.

…So easy to remove

Once the duo-P powder has absorbed all of the dirt after approximately 30 minutes (you can tell because the area will be dry to the touch), simply vacuum over the area to leave your carpet looking beautifully clean.

An added advantage in using duo-P powder on your carpet is that once applied, a built-in fiber protector will help to protect against future damage from soiling or staining.

Of course, older or more stubborn stains may require further treatments. All you then need to do is simply repeat the process until the stain is completely removed.

*will not remove stains which have dyed the carpet fiber

The Perfect Team: The SEBO duo Brush machine and the carpet cleaning powder duo-P.

The dry cleaning system of SEBO is excellent for both spot cleaning and cleaning larger areas. And you can walk on the carpet during the process.

SEBO brings hygienic freshness to your carpet.

Sebo Duo Dry Cleaning Vacuum System

What you should know: In a long-term study performed by the German Association for Allergy Research (GAF), it was shown that 6 months after a single treatment of duo-P, 7 out of 10 carpets proved to be free of dust mite allergens.

Features:

• Moveable i-height Full-color touchscreen
• 640 x 480 screen resolution, 65,536 colors
• Extra wide work area – more than 9″ to the right of the needle
• Independent bobbin winder
• Programmable thread cutter
• On-board help movies
• Multi-language designation
• Computer controlled automatic tension
• Stitch editing: Memory, Cancellation, Turn-over, Elongate
• Built-in memory
• Upper thread, bobbin thread, and presser foot sensors
• Automatic thread tension control
• Automatic drop feed mechanism
• Easy access accessory compartment in top lid
• One-piece sewing light
• Automatic needle threader
• Start/Stop button
• Eight white LED lamps
• 7 piece feed dog with auto drop

• 307 Decorative and Utility stitches, plus 13 one-step buttonholes
• Regular sewing speed: 860 spm with variable speed control
• Twin needle guard
• Start/stop sewing button
• Instant switch-over to/from embroidery to/from regular sewing

• 122 built-in embroidery designs
• 10 Monogram fonts with European letters
• Three built-in alphabets
• Two and three letter monogramming
• Robotic Precision
• Superior data transfer: import and export designs via direct PC connection, ATA PC card, USB memory device, optional USB CD drive, or wireless StitchLink
• PcFolder tool
• Maximum embroidery size: 8″ x 11″
• Embroidery speed 60-800spm
• Change colors to favorite thread (Janome, Robison-Anton, Madeira, Mettler)
• Embroidery area tracing
• Easy drag & drop for editing placement

Specifications:

• One Step Instant Switch To/From Embroidery Mode
• 7.5″ Moveable i-Height Screen
• Ata PC Card; USB Memory Key; Direct PC Link; MC11000 CD-ROM; PC Cards
• Multi-Folders (Embroidery) Built-in Memory: 1 folders ATA PC Card/ USB Memory Key: Unlimited up to 1 gig
• “Multi-Folders (Conventional) Built-in Memory: 1 Folder
• ATA PC Card/ USB Memory Key: Unlimited up to 1 gig”
• Eco Mode: 1-30 min. + Off
• Knee Lifter
• .JEF+ Embroidery Format
• Outer Memory Device: Ata PC Card; USB Memory Key; Direct PC Link; MC11000 CD-ROM; PC Cards
• 8″ x 11″ Maximum Embroidery Field
• 400-800 SPM Embroidery Sewing Speed
• 10 Monogramming Fonts
• Built-In Designs: Macro: 6; Free Arm: 31; Square: 34; Standard: 51
• 2&3 Letter Monogramming Emblems
• Giga Hoop Embroidery: Macro Hoop
• Free Arm Embroidery
• Favorite Thread Selection
• Embroidery Area Tracing
• Standard Hoops: Standard 5″x4″; Square 8″x8″
• 10 Number of Programmed Languages
• Built-in Memory (Embroidery)
• Drag and Drop for Design Position Adjustment
• Arc Layout
• 80%-120% Re-sizing (Design)
• Copy/Paste
• Design Combination
• Zoom Function
• Flip (vertical/horizontal)
• 1-45 degrees Clockwise and Counter-Clockwise Rotation
• Memory indicator
• Embroider Time Indicator (Improved)
• Embroidery Stitch Counter Every 10 Stitches
• Maximum Sewing Speed: 1000 spm
• Stitch Package: 307 Stitches
• 3 Lettering Stitches
• 13 Buttonholes
• Built-in Memory (Ordinary Sewing)
• Twin Needle Guard
• Computer Controlled Thread Tension Control
• Upper Thread Sensor
• Bobbin Thread Sensor
• Presser Foot Sensor
• “P” foot Sensor
• Bottom Storage Compartment
• Automatic Drop Feed Mechanism
• 8 White LED Lamps
• Hard Cover Case

Download the Memory Craft 11000 Brochure Here

Features:

Excellent Maneuverability – The sleek design and front mounted hose, along with three swivel rubber wheels provides greater control and easy maneuverability. The Aria is equipped with a soft non-marring 360 degree bumper for protection of walls and furnishings.

Blower Port – Aria offers a blowing function to remove dust in hard to reach areas. With an additional hose (optional) the Aria can use the suction and blowing function simultaneously. Aria’s powerful 1200 watt motor can inflate air beds, clean heat/air conditioning vents, and get behind hard to reach appliances etc.

Carpet Cleaner – The power head and dry-cleaning functions are standard on the Elite and Platinum series, optional on the Red. The electrified hose with controls for both vacuum and brush motors, has a quick release cordless connection for attaching the power nozzle, wand, and accessory tools. The sturdy stainless steel telescopic wand provides convenient height adjustments for easy vacuuming.

Turbo Power Nozzle – Thanks to the powerful vacuum, Aria can be equipped with an optional multipurpose turbo nozzle for carpets and upholstery.

Dry Cleaning System – The multipurpose power nozzle transforms to a dry cleaning system that cleans and sanitizes carpets and upholstery. Use the Lindhaus Pure Power micro-sponges, made from soft natural fibers damp to the touch with organic cleaning essentials. The powerful brush works these sponges throughout the carpet, absorbing the grime as they wash the fibers. The soiled micro-sponges are simply swept away with your Aria in the vacuum mode. The Dry Cleaning feature is extremely easy to use, yet provides deep thorough results that ensure a clean healthy home.

Universal Brush – The award winning design of this patented low profile nozzle works on hard floors and safely cleans expensive hand woven rugs and carpets. The dual swivel neck and 4 rubber wheels assures precision cleaning in and around hard to navigate furnishings.

Nozzle with Felt – The available felt floor nozzle polishes and vacuums delicate floors such as marble, wood, and laminates. The felt pad may be removed exposing the bristles which are excellent for use on cement or rough tile floorings.

On-Board Accessories – The full sized deluxe on-board accessories include a multi-purpose upholstery/stair tool, full length crevice tool and natural bristle swivel dusting brush. Further accessories such as the optional turbo brush are also available.

Transports Easily – The two ergonomic upper and lower handles and the perfect weight distribution make transporting the Aria effortless in the horizontal or vertical position. The tapered profile, allows the machine to easily fit on a stair step.

Control Panel (Red and Elite) – Aria “Red” and “Elite” are equipped with a manual electronic control. The functions include: soft start, power and motor temperature control. A series of easy to read color coded lights indicate the selected power level.

Control Panel (Platinum) – Aria “Platinum” is equipped with a sophisticated electronic control allowing it to automatically regulate the correct power for major uses. With a simple touch of a button you can increase or decrease the power to suit your individual needs. All the Aria models are equipped with full bag indicator.

Aria Filtration:

All Lindhaus vacuum systems have user selectable filtration, up to HEPA. Our unique system allows you to choose not only the level, but the type of contaminants you would like to remove from your home everytime you clean.

The standard filtration packaged at the factory with each vacuum is a 3M® filtrete electrostatic microfilter. This is the same type filter used in hospitals to keep biological contaminates in check. The filtration efficiency tests done on Lindhaus vacuums by the independent laboratory IBR (USA) show the result of a Lindhaus sealed filtration system.

All models of Lindhaus vacuums can also be fitted with an optional S-class HEPA filter, available from your dealer, for filtration of particles 0.3 microns or larger at an efficiency of 99.97%. This allows you to acheive a higher level of filtration during the allergy seasons or when contaminants may be at a higher level in your home, such as after dusting.

Features

Backlit LCD screen
PC link via ATA PC card
Upgradeable via software
Maximum embroidery size: 5.5″ x 7.9″ (140mm x 200mm)
Embroidery speed 400 – 650spm
Built-in designs: 100
Fonts: 3
Monogramming: 2 & 3 letter
Built-in memory
Compatible with Janome software
Change colors of favorite thread: Janome, Robison-Anton, Madeira, Mettler
Drag & Drop editing for easy placement
Embroidery design resize 90%, 100%, 110%, 120%
Rotate in 45 degree increments
Flip vertically and horizontally
Standard Hoops: Large 5.5″ x 7.9″ (140mm x 200mm), Standard 5″ x 4.3″ (126mm x 110mm)
Embroidery area tracing
MY SET screen controls for contrast, in/cm designation, and other customization
Zoom in and out
Multi-language selection
Stitch-out time indicator
Stitch counter
Upper thread and presser foot sensors
Manual thread tension control
One-piece sewing light

Features

135 Stitches across 4 modes
7 Buttonholes
Block and script monogram stitches
Backlit LCD screen
Maximum sewing speed: 1000spm/Straight; 700spm/Zigzag
Speed control lever
Arm and bed space: 9″ x 5″ (225mm x 120mm)
Visible pressure gauge
Jam-proof, magnetic, top-loading, full-rotary hook system
Independent motor for bobbin winding
Automatic thread cutter, with memory capability
SFS (superior feed system)
External feed balancing dial
Front access feed dog up/down control
Adjustable stitch width from 0 to 7mm
Adjustable stitch length from 0 to 5mm
Individual stitch editing
Combination stitch editing
Elongation
Turn over memory
Recall memory bank
Resumption set/last stitch recall
Auto-lock, Lock-a-matic, and needle up/down quick command keys
Vertical thread delivery system with dual thread guide bar
Built-in needle threader
71 needle drop positions (including 15 left to right needle positions)
Extra-high presser foot lift
Twin needle guard
Knee lifter
Extended seam allowance guide
Beep indicator shut-off
14 standard feet
Large extension table
10 languages available on-screen
Electronic foot control
Sewing light
Soft dust cover

Features

Five-hole needle plate with five needle unit
Single-hole needle plate
Single needle unit
Free arm capability
Easy clean lint box
See-through adjustable presser foot
See-through finger guard
Standard foot control
Bright working light
Durable construction